Advanced Composites

Sort By:
Display: List Grid
  • EN401 - Epoxy Laminating Resin
    EN 401 Epoxy Laminating resin of medium viscosity (3500 cP) in combination with hardener 89 offers low shrinkage and is used to make accurate tools and industrial parts with a temperature resistance above 150C. Medium viscosity system (2300 cP) and pot life of about 60 minutes for 1 kg at 20 C. R..
  • EP970 - Epoxy Infusion Resin
    Epoxy Infusion resin used with a variety of hardeners to give variable pot life. Good impregnation and wetting properties. Used to make fibreglass, carbon and aramid tools, moulds, boating components, etc. Mixed viscosity from 500 (pot life 250 minutes) to 1100 cP (pot life 25 minutes). HDT 70..
  • Gel Coat AF Blue Anti-Abrasion
    Gel Coat AF Blue used to make foundry patterns, thixotropic, very high abrasion resistance and good chemical resistance. Apply the first coat with a short- bristle brush. Once the first coat has become to gel, apply the second coat.  The gel time is temperature dependent and at RT (20 C) it ..
  • Gel Coat Alu
    Aluminium filled Gel Coat used to make moulds by the lay-up method, for vacuum forming applications and moulds to cast PU components. Temperature of operation 120C. Easy to polish. Applied with gel coat brush. Mix ratio:         O Paste Alu :  100       &nb..
  • Gel Coat OK White Epoxy
    White epoxy gel coat easy to sand, used to make foundry negatives, and to repair composite products. especially designed for moulds used in the ceramic industry. ..
  • Gel Coat SB Black
    High Quality Gel Coat with very good chemical resistance, especially against polyester resins. With hardener BWS a pot life of 30 minutes is obtained. Stable up to 110 C. Apply two coats. The second coat must be applied once the first coat is still tacky, at 20 C it takes about 60 minutes.  ..